requestId:686149121fe152.49061559.
Photovoltaic charging rods (stations) are divided into two types: independent photovoltaic charging rods (stations) and parallel photovoltaic charging rods (stations). The independent photovoltaic charging station (station) is not connected to the national network. In the dream, the heroine has achieved good results in every topic, and Ye Qiu, who has the lowest performance, was released from the photovoltaic shed. Any installation is required to be equipped with Sugar babyenergy system. The construction of electric vehicle photovoltaic charging stations (stations) is a combination of photovoltaic power generation and new power electric vehicles. It can also promote the popularization of new power electric vehicles while cleaning renewable photovoltaic power generation, which should be serious about dynamic crisis and environmental purification. Construction can be considered first in areas where parking spaces are particularly tightly supplied by lighting conditions.
1. Current development status of photovoltaic industry
Modern society, dynamic crisisSugar baby and environmental purification problems are becoming increasingly prominent. People are gradually focusing on clean and clean renewable power with a clear and clean look. Sunlight has many advantages such as inexhaustible, inexhaustible, and widespread existence, which is a hot topic in the research and development of new power applications. Photovoltaic cells should perform tasks based on photovoltaic special effects. The photoelectric element that converts energy into solar cells is called solar cells or is also called Sugar daddy. [1] Photovoltaic batteries include: crystalline silicon batteries (including polycrystalline silicon and single crystalline silicon), silicon-based thin film batteries, multi-compound thin film batteries, dye-sensitized nano crystal batteries, organic polymer batteries, etc. Today, crystalline silicon batteries occupy a mainstream position in the market. Today, the market entry point for polycrystalline silicon components is 16%: 156×156 standard polycrystalline silicon 60 pieces, which is comparable to the component power of 265W; the market entry point for single crystal silicon components is 168%: 156×156 standard polycrystalline silicon 60 pieces, which is comparable to the component power of 275W. Single crystal silicon has a slightly higher efficiency than polycrystalline silicon optoelectronics, but the price exceeds a lot, and the price is not advantageous compared to single crystal silicon. Therefore, there are more polycrystalline silicon applications on the market than single crystal silicon. Today, the effectiveness of industrial silicon battery components can reach 20%, but the theoretical optical conversion efficiency of silicon batteries is 298%. [2] There is still a lot of space in technology. Photovoltaic batteries are neither constant pressure nor constant current sources, and are specialized in their mission.Manila escort can be seen from the certain lighting and temperature that it has only one maximum power output point. Since the cost of photovoltaics is not low today, how to make photovoltaic batteries always work to reduce the system cost at their maximum power points under different light and temperature is a problem that photovoltaic systems have to solve. This is the so-called maximum power point tracking (MPPT).
We are a global leader in the photovoltaic manufacturing industry. In 2007, my country became the country with the largest production of photovoltaic batteries, but at that time it was most important to export; with the promotion of market demand and related policy support, China’s total photovoltaic installations exceeded american and became the world’s first market for night photovoltaic installations. Among them, China not only had the world’s largest photovoltaic assembly production, but also had the world’s first largest photovoltaic assembly production. This situation has always been href=”https://philippines-sugar.net/”>Sugar daddyTo this day, it is expected that this situation will continue to go down in the next period of time. The technology progress of the photovoltaic industry is obvious. While the system’s effectiveness continues to increase, the system’s capital continues to fall. You are the most promising person in our community. After getting a good grade, I will be able to pass the exam and realize the price of using the side of the electricity in 2020, and the price of using the side of the electricity in 2025. The photovoltaic power generation will be gradually cancelled and replenished in the segment.
As of December 2017, my country’s photovoltaic accumulative installations have exceeded 120GW. On July 19, 2017, the National Bureau of Dynamics issued the “Guiding Opinions on Implementation of the 13th Five-Year Plan for Renewable Dynamics Development” and pointed out that from 2017 to 2020, a new planning installation (including a 32GW runner plan) of 865GW, a total of 60GW of distributed photovoltaic installations, and other unlimited scales of 7 provinces and cities will add 10GW, and a new supply of customer and village support will add 15GW. This shows that after the rapid development and short trough period, my country’s photovoltaic industry will usher in a healthy development path under the influence of markets and policies.
2. Electric car and charging
As my country’s social development and the progress of people’s careers, the sales volume of automobiles continues..net/”>Sugar baby how manyEscort is the world’s first place in the world, and the number of motor vehicles is growing rapidly. While providing convenience to people, motor vehicles have accelerated the consumption of petrochemical power and reduced the purification of the environment. New electric power vehicles use electricity to replace oil, which can achieve zero emissions and achieve widespread development within the living world. my country has also launched a number of new electric power vehicles to support the support policies of new electric power vehicles. The most direct sensory infection is the purchase of car supplements and taxes. In March 2015, the “Electric Auto Charging Basic Equipment Construction Plan” released by the State Council Office pointed out that by 2020, my country will achieve 5 million new power automobile development goals, and the number of charging stations will reach 120,000. Charging has reached 4.8 million. According to relevant guidance opinions, the “station is the first” during construction. The parking space for the newly built office should be 100% of the charging facilities or pre-stayed construction and installation conditions. Parking facilities for large public buildings and public parking facilities for social public parking facilities are builtEscortThe proportion of seats for charging facilities or pre-reserved construction and installation conditions shall not be less than 10%, and every 2,000 electric vehicles are available. ManilaMotors can be built with a public charging station. It can be seen that the charging facilities of electric vehicles will continue to develop rapidly in the future.
Electrical charging methods include fast charging, slow charging, wireless charging, and replacement. daddy four methods of electric power. Fast charging, large charging power, large charging current, short charging time, generally 20 minutes to 2 hours; slow charging and fast charging, generally 5 to 10 hours; wireless charging is non-contact charging, with the development of technology, it has now gone from the experiment room to the demonstration application stage, but the charging efficiency is relatively low, which is rarely seen in the market today; the method of changing power is to directly use a charged battery to change the powerSugar daddyBattery that consumes less energy is very fast, but is only suitable for automotive battery modelsEscort has the same number and the car belongs to a legal entity, such as a bus company or a car rental company. Electric car charging rods are divided into two categories: traffic charging rods and DC charging rods. Traffic charging rods are supplied to traffic, and the battery is charged according to the car charging system. The common power is 33kW (opportunity)For household use), 7kW, 22kPinay escortW, etc., the power is relatively small, which is a slow charging. The DC charging rod provides DC power, which directly charges the battery, but must be matched with the car BMS system. The DC charging power is very large, such as 45kW, 60kW, 120kWSugar baby, 150kW, etc., and most of them are fast charging, but there are also DC slow charging with relatively small power. Charging facilities will gradually develop from fast charging and power conversion to the goal of slow charging as the main and fast charging as the standard.
3. Related issues in the construction of photovoltaic charging stations (stations)
On the one hand, new electric power vehicles have many shortcomings such as short range, slow charging speed, and inconvenient charging. The construction and perfection of related basic facilities such as electric vehicle charging and other related fields promote each other, and it can also be said that the popularization of electric vehicle promotion TC: